TY  - JOUR
AU  - Tamindžić, Gordana
AU  - Azizbekian, Sergei
AU  - Miljaković, Dragana
AU  - Turan, Jan
AU  - Nikolić, Zorica
AU  - Ignjatov, Maja
AU  - Milošević, Dragana
AU  - Vasiljević, Sanja
PY  - 2023
UR  - http://fiver.ifvcns.rs/handle/123456789/4156
AB  - Nanopriming is a newly developed seed technology that improves seed germination, initial plant growth, and crop yield by enabling plants to withstand a variety of abiotic stresses. The objective of this study was to evaluate the effectiveness of comprehensive metal-based (Co, Mn, Cu, Fe, Zn, Mo, and Se) nanopriming as compared to hydro- and non-primed seeds of three different pea cultivars in a germination test. Seed priming with nanoparticles (NPs) improved field pea quality via significant increase in germination energy (cv. E-244), final germination (cv. E-244, cv. Dukat), shoot length (cv. E-244, cv. Partner), root length (cv. E-244, cv. Dukat, cv. Partner), fresh shoot weight (cv. Partner), dry shoot weight (cv. Partner), seedling vigor index (cv. E-244, cv. Partner), and chlorophyll content (cv. Dukat, cv. Partner), as compared to both hydropriming and the control. Moreover, nanopriming led to significant improvements in shoot length, fresh shoot length, dry shoot length, seedling vigor index (cv. Dukat), and dry root weight (cv. E-244) as compared to the control only. In general, the highest effect on the examined parameters was achieved by nanopriming, indicating that this treatment may be utilized to raise field pea quality performance. To optimize the method, it is necessary to conduct extensive laboratory and field trials.
PB  - Basel : MDPI
T2  - Agronomy - Basel
T1  - Comprehensive Metal-Based Nanopriming for Improving Seed Germination and Initial Growth of Field Pea (Pisum sativum L.)
IS  - 12
SP  - 2932
VL  - 13
DO  - 10.3390/agronomy13122932
ER  - 

@article{
author = "Tamindžić, Gordana and Azizbekian, Sergei and Miljaković, Dragana and Turan, Jan and Nikolić, Zorica and Ignjatov, Maja and Milošević, Dragana and Vasiljević, Sanja",
year = "2023",
abstract = "Nanopriming is a newly developed seed technology that improves seed germination, initial plant growth, and crop yield by enabling plants to withstand a variety of abiotic stresses. The objective of this study was to evaluate the effectiveness of comprehensive metal-based (Co, Mn, Cu, Fe, Zn, Mo, and Se) nanopriming as compared to hydro- and non-primed seeds of three different pea cultivars in a germination test. Seed priming with nanoparticles (NPs) improved field pea quality via significant increase in germination energy (cv. E-244), final germination (cv. E-244, cv. Dukat), shoot length (cv. E-244, cv. Partner), root length (cv. E-244, cv. Dukat, cv. Partner), fresh shoot weight (cv. Partner), dry shoot weight (cv. Partner), seedling vigor index (cv. E-244, cv. Partner), and chlorophyll content (cv. Dukat, cv. Partner), as compared to both hydropriming and the control. Moreover, nanopriming led to significant improvements in shoot length, fresh shoot length, dry shoot length, seedling vigor index (cv. Dukat), and dry root weight (cv. E-244) as compared to the control only. In general, the highest effect on the examined parameters was achieved by nanopriming, indicating that this treatment may be utilized to raise field pea quality performance. To optimize the method, it is necessary to conduct extensive laboratory and field trials.",
publisher = "Basel : MDPI",
journal = "Agronomy - Basel",
title = "Comprehensive Metal-Based Nanopriming for Improving Seed Germination and Initial Growth of Field Pea (Pisum sativum L.)",
number = "12",
pages = "2932",
volume = "13",
doi = "10.3390/agronomy13122932"
}

Tamindžić, G., Azizbekian, S., Miljaković, D., Turan, J., Nikolić, Z., Ignjatov, M., Milošević, D.,& Vasiljević, S.. (2023). Comprehensive Metal-Based Nanopriming for Improving Seed Germination and Initial Growth of Field Pea (Pisum sativum L.). in Agronomy - Basel
Basel : MDPI., 13(12), 2932.
https://doi.org/10.3390/agronomy13122932

Tamindžić G, Azizbekian S, Miljaković D, Turan J, Nikolić Z, Ignjatov M, Milošević D, Vasiljević S. Comprehensive Metal-Based Nanopriming for Improving Seed Germination and Initial Growth of Field Pea (Pisum sativum L.). in Agronomy - Basel. 2023;13(12):2932.
doi:10.3390/agronomy13122932 .

Tamindžić, Gordana, Azizbekian, Sergei, Miljaković, Dragana, Turan, Jan, Nikolić, Zorica, Ignjatov, Maja, Milošević, Dragana, Vasiljević, Sanja, "Comprehensive Metal-Based Nanopriming for Improving Seed Germination and Initial Growth of Field Pea (Pisum sativum L.)" in Agronomy - Basel, 13, no. 12 (2023):2932,
https://doi.org/10.3390/agronomy13122932 . .

TY  - JOUR
AU  - Sedlar, Aleksandar
AU  - Gvozdenac, Sonja
AU  - Pejović, Momčilo
AU  - Višacki, Vladimir
AU  - Turan, Jan
AU  - Tanasković, Snežana
AU  - Burg, Patrik
AU  - Vasić, Filip
PY  - 2022
UR  - http://fiver.ifvcns.rs/handle/123456789/2596
AB  - Protective fungicides are sensitive to environmental conditions such as rainfall and solar radiation. Therefore, it is important to prolong the biological activity and fungicide resistance to the above-mentioned factors that can be achieved by adding a wetting agent to the working solution. Additionally, the quality and efficiency of preventive contact fungicides significantly depend on the application technique. Thus, it is important to make the right choice of the nozzles and adjust the working parameters of the treatment. The aim of this work is to determine the influence of a wetting agent and type of nozzle on copper hydroxide (2 L ha−2) deposits on sugar beet leaves. Experiments are set up under laboratory and field conditions. A pinole-based wetting agent is applied at three rates (0.3, 0.6, and 1.0 L ha−1) and two types of nozzles are used (standard with flat jet and modern turbo-drop twin-jet). A brilliant blue tracer is added to a working solution to enable the measurement of copper hydroxide deposits. The deposit amount is recorded before and after the rain simulation (15 L m−2) with a spectrophotometer light beam. In order to ensure the timeliness of the application of fungicides, remote sensing of vegetative indices is used as an indicator of disease occurrence. The results indicated an increase in copper hydroxide deposits with the increase in wetting agent rates for both types of nozzles and in both laboratory and field experiments. Moreover, when applying the copper hydroxide mixtures with modern turbo drop nozzles, the increase in copper hydroxide deposit is significant, compared to the standard nozzles.
PB  - Basel : MDPI
T2  - Applied Sciences
T1  - The influence of wetting agent and type of nozzle on copper hydroxide deposit on sugar beet Leaves (Beta vulgaris L.)
IS  - 12
SP  - 2911
DO  - 10.3390/app12062911
ER  - 

@article{
author = "Sedlar, Aleksandar and Gvozdenac, Sonja and Pejović, Momčilo and Višacki, Vladimir and Turan, Jan and Tanasković, Snežana and Burg, Patrik and Vasić, Filip",
year = "2022",
abstract = "Protective fungicides are sensitive to environmental conditions such as rainfall and solar radiation. Therefore, it is important to prolong the biological activity and fungicide resistance to the above-mentioned factors that can be achieved by adding a wetting agent to the working solution. Additionally, the quality and efficiency of preventive contact fungicides significantly depend on the application technique. Thus, it is important to make the right choice of the nozzles and adjust the working parameters of the treatment. The aim of this work is to determine the influence of a wetting agent and type of nozzle on copper hydroxide (2 L ha−2) deposits on sugar beet leaves. Experiments are set up under laboratory and field conditions. A pinole-based wetting agent is applied at three rates (0.3, 0.6, and 1.0 L ha−1) and two types of nozzles are used (standard with flat jet and modern turbo-drop twin-jet). A brilliant blue tracer is added to a working solution to enable the measurement of copper hydroxide deposits. The deposit amount is recorded before and after the rain simulation (15 L m−2) with a spectrophotometer light beam. In order to ensure the timeliness of the application of fungicides, remote sensing of vegetative indices is used as an indicator of disease occurrence. The results indicated an increase in copper hydroxide deposits with the increase in wetting agent rates for both types of nozzles and in both laboratory and field experiments. Moreover, when applying the copper hydroxide mixtures with modern turbo drop nozzles, the increase in copper hydroxide deposit is significant, compared to the standard nozzles.",
publisher = "Basel : MDPI",
journal = "Applied Sciences",
title = "The influence of wetting agent and type of nozzle on copper hydroxide deposit on sugar beet Leaves (Beta vulgaris L.)",
number = "12",
pages = "2911",
doi = "10.3390/app12062911"
}

Sedlar, A., Gvozdenac, S., Pejović, M., Višacki, V., Turan, J., Tanasković, S., Burg, P.,& Vasić, F.. (2022). The influence of wetting agent and type of nozzle on copper hydroxide deposit on sugar beet Leaves (Beta vulgaris L.). in Applied Sciences
Basel : MDPI.(12), 2911.
https://doi.org/10.3390/app12062911

Sedlar A, Gvozdenac S, Pejović M, Višacki V, Turan J, Tanasković S, Burg P, Vasić F. The influence of wetting agent and type of nozzle on copper hydroxide deposit on sugar beet Leaves (Beta vulgaris L.). in Applied Sciences. 2022;(12):2911.
doi:10.3390/app12062911 .

Sedlar, Aleksandar, Gvozdenac, Sonja, Pejović, Momčilo, Višacki, Vladimir, Turan, Jan, Tanasković, Snežana, Burg, Patrik, Vasić, Filip, "The influence of wetting agent and type of nozzle on copper hydroxide deposit on sugar beet Leaves (Beta vulgaris L.)" in Applied Sciences, no. 12 (2022):2911,
https://doi.org/10.3390/app12062911 . .

TY  - CONF
AU  - Koprivica, Ranko
AU  - Veljković, Biljana
AU  - Turan, Jan
AU  - Radivojević, Dušan
AU  - Ćurčić, Srećko
AU  - Mileusnić, Zoran
AU  - Balalić, Igor
PY  - 2019
UR  - http://fiver.ifvcns.rs/handle/123456789/1940
AB  - Knowing the coefficient of friction of bio material is important in determining the angle of the grain elevator elevator when designing combines, as well as the angles of gravity tables and pipes in seed finishing. The basic characteristic of biological materials, or seeds of agricultural crops, is that they differ in their physical and morphological characteristics. Therefore, the friction depends on: the types of plants, variety, shape, dimensions and seed content, the humidity of the seed, the intensity of the normal force on the substrate and the roughness of the substrate. The paper presents the results of the study of the influence of individual factors (varieties, water content of the grain and the type of substrate) and their interactions on the grain friction coefficient. The domestic varieties that are grown in Serbia are selected for testing the fruiting grain fruity: Banadanka, Jasna and Slavica. The experimental measurement of the static coefficient of grain slip friction was done using the level of the mechanical device Tribometr. Plastic, plywood, galvanized, steel, aluminum and stainless steel sheet are made for the experiment purposes. Research was carried out with different water content in grains: 6%, 11%, 16% and 24%. The variety Banadanka had a lower friction coefficient compared to Jasna and Slavica varieties on all substrates and with all the water content of the grain. It was found that with the increase of water content in the grain, a significant increase in the friction coefficient of the grains of the tested varieties on all substrates was achieved. The highest friction coefficient for all water content of the grains of the tested varieties was on the base of the plywood board, and the smallest on the base of stainless steel sheet.
C3  - PES: Proceedinds on Engineering Sciences
T1  - Coefficient of explosion of grape oil repas in respect of variety, content of humidity and surface
EP  - 525
IS  - 1
SP  - 518
VL  - 1
DO  - 10.24874/PES01.01.068
ER  - 

@conference{
author = "Koprivica, Ranko and Veljković, Biljana and Turan, Jan and Radivojević, Dušan and Ćurčić, Srećko and Mileusnić, Zoran and Balalić, Igor",
year = "2019",
abstract = "Knowing the coefficient of friction of bio material is important in determining the angle of the grain elevator elevator when designing combines, as well as the angles of gravity tables and pipes in seed finishing. The basic characteristic of biological materials, or seeds of agricultural crops, is that they differ in their physical and morphological characteristics. Therefore, the friction depends on: the types of plants, variety, shape, dimensions and seed content, the humidity of the seed, the intensity of the normal force on the substrate and the roughness of the substrate. The paper presents the results of the study of the influence of individual factors (varieties, water content of the grain and the type of substrate) and their interactions on the grain friction coefficient. The domestic varieties that are grown in Serbia are selected for testing the fruiting grain fruity: Banadanka, Jasna and Slavica. The experimental measurement of the static coefficient of grain slip friction was done using the level of the mechanical device Tribometr. Plastic, plywood, galvanized, steel, aluminum and stainless steel sheet are made for the experiment purposes. Research was carried out with different water content in grains: 6%, 11%, 16% and 24%. The variety Banadanka had a lower friction coefficient compared to Jasna and Slavica varieties on all substrates and with all the water content of the grain. It was found that with the increase of water content in the grain, a significant increase in the friction coefficient of the grains of the tested varieties on all substrates was achieved. The highest friction coefficient for all water content of the grains of the tested varieties was on the base of the plywood board, and the smallest on the base of stainless steel sheet.",
journal = "PES: Proceedinds on Engineering Sciences",
title = "Coefficient of explosion of grape oil repas in respect of variety, content of humidity and surface",
pages = "525-518",
number = "1",
volume = "1",
doi = "10.24874/PES01.01.068"
}

Koprivica, R., Veljković, B., Turan, J., Radivojević, D., Ćurčić, S., Mileusnić, Z.,& Balalić, I.. (2019). Coefficient of explosion of grape oil repas in respect of variety, content of humidity and surface. in PES: Proceedinds on Engineering Sciences, 1(1), 518-525.
https://doi.org/10.24874/PES01.01.068

Koprivica R, Veljković B, Turan J, Radivojević D, Ćurčić S, Mileusnić Z, Balalić I. Coefficient of explosion of grape oil repas in respect of variety, content of humidity and surface. in PES: Proceedinds on Engineering Sciences. 2019;1(1):518-525.
doi:10.24874/PES01.01.068 .

Koprivica, Ranko, Veljković, Biljana, Turan, Jan, Radivojević, Dušan, Ćurčić, Srećko, Mileusnić, Zoran, Balalić, Igor, "Coefficient of explosion of grape oil repas in respect of variety, content of humidity and surface" in PES: Proceedinds on Engineering Sciences, 1, no. 1 (2019):518-525,
https://doi.org/10.24874/PES01.01.068 . .

TY  - JOUR
AU  - Uhlarik, Ana
AU  - Popov, Siniša
AU  - Karagić, Đura
AU  - Ponjičan, Ondrej
AU  - Turan, Jan
PY  - 2018
UR  - http://fiver.ifvcns.rs/handle/123456789/1813
AB  - The paper analyzes alfalfa seed cleaning using a magnetic separator, and the influence of the dodder seed amount on the cleaned seed amount. Seed cleaning was performed at the Institute of Field and Vegetable Crops in Novi Sad and three alfalfa seed lots were cleaned after passing through the primary cleaning process (selector, gravity table and roll mill). After cleaning, the quantity of pure seed (kg), waste (kg) and the time used for cleaning (h) was measured. The input quantity of all three seed lots was 1000 kg, whereas the waste ranged from 7.8 to 9.8 kg after cleaning. The purpose of this study is to monitor the operation of a magnetic separator in order to determine the amount of waste after cleaning. On the basis of the results obtained, an insight into the influence of the dodder seed amount on the cleaning rate and the required number of cleaning repetitions was obtained.
AB  - Pri doradi semena lucerke veoma je važno dobiti čisto seme bez prisutva karantinskih korova. U radu je analiziran proces dorade semena lucerke na magnetnom prečistaču (dekuskutoru) tipa Emceka Gompper i uticaj količine semena viline kosice (Cuscuta spp.) na dobijenu količinu prečišćenog semena. Po zakonu o čistoći semena, u dorađenom semenu lucerke nije dozvoljeno prisustvo ni jednog semena viline kosice. Dorada semena lucerke urađena je u Zavodu za krmno bilje u Institutu za ratarstvo i povrtarstvo u Novom Sadu, a dorađivane su tri partije semena koje je prošlo primarni proces dorade (selektor, gravitacioni sto i rol mašinu). Partije su imale različitu količinu semena viline kosice. Nakon procesa dorade je merena količina čistog semena (kg), otpada (kg) i vremena potrebnog za prečišćavanje (h). Ulazna količina sve tri prečišćavanje partije semena lucerke je iznosila 1000 kg a nakon prečišćavanja otpad je iznosio od 7,8 do 9,8 kg. Cilj ispitivanja je bio praćenje rada mašine Emceka Gompper kako bi se ustanovila količina izdvojenog otpada, tj gubitaka semena u procesu prečišćavanja. Na osnovu rezultata dobija se uvid u uticaj količine semena viline kosice na brzinu prečišćavanja i potreban broj ponavljanja prečišćavanja semena lucerke.
PB  - Nacionalno društvo za procesnu tehniku i energetiku u poljoprivredi, Novi Sad
T2  - Journal on Processing & Energy in Agriculture
T1  - Alfalfa seed cleaning using a magnetic separator
T1  - Prečišćavanje semena lucerke na magnetnom prečistaču
EP  - 195
IS  - 4
SP  - 192
VL  - 22
DO  - 10.5937/jpea1804192U
ER  - 

@article{
author = "Uhlarik, Ana and Popov, Siniša and Karagić, Đura and Ponjičan, Ondrej and Turan, Jan",
year = "2018",
abstract = "The paper analyzes alfalfa seed cleaning using a magnetic separator, and the influence of the dodder seed amount on the cleaned seed amount. Seed cleaning was performed at the Institute of Field and Vegetable Crops in Novi Sad and three alfalfa seed lots were cleaned after passing through the primary cleaning process (selector, gravity table and roll mill). After cleaning, the quantity of pure seed (kg), waste (kg) and the time used for cleaning (h) was measured. The input quantity of all three seed lots was 1000 kg, whereas the waste ranged from 7.8 to 9.8 kg after cleaning. The purpose of this study is to monitor the operation of a magnetic separator in order to determine the amount of waste after cleaning. On the basis of the results obtained, an insight into the influence of the dodder seed amount on the cleaning rate and the required number of cleaning repetitions was obtained., Pri doradi semena lucerke veoma je važno dobiti čisto seme bez prisutva karantinskih korova. U radu je analiziran proces dorade semena lucerke na magnetnom prečistaču (dekuskutoru) tipa Emceka Gompper i uticaj količine semena viline kosice (Cuscuta spp.) na dobijenu količinu prečišćenog semena. Po zakonu o čistoći semena, u dorađenom semenu lucerke nije dozvoljeno prisustvo ni jednog semena viline kosice. Dorada semena lucerke urađena je u Zavodu za krmno bilje u Institutu za ratarstvo i povrtarstvo u Novom Sadu, a dorađivane su tri partije semena koje je prošlo primarni proces dorade (selektor, gravitacioni sto i rol mašinu). Partije su imale različitu količinu semena viline kosice. Nakon procesa dorade je merena količina čistog semena (kg), otpada (kg) i vremena potrebnog za prečišćavanje (h). Ulazna količina sve tri prečišćavanje partije semena lucerke je iznosila 1000 kg a nakon prečišćavanja otpad je iznosio od 7,8 do 9,8 kg. Cilj ispitivanja je bio praćenje rada mašine Emceka Gompper kako bi se ustanovila količina izdvojenog otpada, tj gubitaka semena u procesu prečišćavanja. Na osnovu rezultata dobija se uvid u uticaj količine semena viline kosice na brzinu prečišćavanja i potreban broj ponavljanja prečišćavanja semena lucerke.",
publisher = "Nacionalno društvo za procesnu tehniku i energetiku u poljoprivredi, Novi Sad",
journal = "Journal on Processing & Energy in Agriculture",
title = "Alfalfa seed cleaning using a magnetic separator, Prečišćavanje semena lucerke na magnetnom prečistaču",
pages = "195-192",
number = "4",
volume = "22",
doi = "10.5937/jpea1804192U"
}

Uhlarik, A., Popov, S., Karagić, Đ., Ponjičan, O.,& Turan, J.. (2018). Alfalfa seed cleaning using a magnetic separator. in Journal on Processing & Energy in Agriculture
Nacionalno društvo za procesnu tehniku i energetiku u poljoprivredi, Novi Sad., 22(4), 192-195.
https://doi.org/10.5937/jpea1804192U

Uhlarik A, Popov S, Karagić Đ, Ponjičan O, Turan J. Alfalfa seed cleaning using a magnetic separator. in Journal on Processing & Energy in Agriculture. 2018;22(4):192-195.
doi:10.5937/jpea1804192U .

Uhlarik, Ana, Popov, Siniša, Karagić, Đura, Ponjičan, Ondrej, Turan, Jan, "Alfalfa seed cleaning using a magnetic separator" in Journal on Processing & Energy in Agriculture, 22, no. 4 (2018):192-195,
https://doi.org/10.5937/jpea1804192U . .

TY  - JOUR
AU  - Sedlar, Aleksandar
AU  - Višacki, Vladimir
AU  - Uhlarik, Ana
AU  - Bugarin, Rajko
AU  - Turan, Jan
AU  - Ponjičan, Ondrej
PY  - 2017
UR  - http://fiver.ifvcns.rs/handle/123456789/2597
AB  - Za pravilnu i uspešnu primenu pesticida od posebnog je značaja izvršiti izbor
odgovarajućih rasprskivača. Takođe, rad sa odgovarajućim pritiskom ima veliki uticaj na
efikasnost tretiranja. Koliko će tretiranje biti uspešno direktno zavisi od poprečne
distribucije pesticida. Dobra poprečna distribucija znači: ujednačen oblik i veličinu kapi,
smanjenje odnošenja kapljica vetrom (drift), ujednačena količina sredstva i ravnomerna
raspodela kapi, a sve u cilju manje potrošnje korišćenog pesticida i manjih troškova
tretiranja. Rasprskivači se, uglavnom, izrađuju za definisan radni pritisak, koji može da
obezbedi potrebnu dezintegraciju kapljica. Da bi kvalitet zaštite bio dobar i vek rasprskivača
duži, pritisak tečnosti mora da se održava u tolerantnim granicama. Sa povećanjem pritiska
veličina kapljica se smanjuje. Poprečna distribucija unutar celookupnog posmatranog
područja mora biti jednaka, te se izražava pomoću koeficijenta varijacije koji ne sme biti
veći od 10%. U području potpunog prekrivanja površine tečnošću, izbačena količina
tečnosti ne sme da odstupa više od 10%. Navedeno je od posebnog značaja u tretiranju
uljane repice, kao kultura sa velikom ali tankom biljnom masom u završnim fazama razvoja.
Dobijeni razultati trebalo bi da prikažu koji od četiri testirana tipa rasprskivača daje najbolje
rezultate rada pri promeni pritiska.
AB  - For the proper and successful use of pesticides it is especially important to select
the appropriate sprayers. Also, working with appropriate pressure has a major impact on the
effectiveness of treatment. How much treatment will be successfully done, directly depends
on the transverse distribution of pesticides. Good cross distribution means: uniform shape
and size of drops, drift reduction, uniform quantity of the product and even distribution of
drops in order to reduce the consumption of pesticides and smaller treatments. Sprayers are
mainly made for the defined operating pressure, which can provide the necessary
disintegration of droplets. In order for the quality of protection to be good and the life of
the sprayer longer, the pressure of the liquid must be maintained within tolerant limits. With
the increase in pressure, the droplet size decreases. The transverse distribution within the
entire observed area must be the same, expressed by the coefficient of variation, which must
not be greater than 10%. In the area of total overlapping of the surface with liquid, the
discharge of the liquid must not deviate more than 10%. The obtained results should show
which of the four tested type of sprayer produces the best results in changing pressure.
PB  - Novi Sad: National Society for Agricultural Engineering
T2  - Savremena poljoprivredna tehnika
T1  - Radni pritisak kao faktor uniformnosti distribucije rasprskivača posebne namene
T1  - Operating pressure as a factor of distribution uniformity of nozzle for special purpose
EP  - 34
IS  - 1
SP  - 27
VL  - 43
UR  - https://hdl.handle.net/21.15107/rcub_fiver_2597
ER  - 

@article{
author = "Sedlar, Aleksandar and Višacki, Vladimir and Uhlarik, Ana and Bugarin, Rajko and Turan, Jan and Ponjičan, Ondrej",
year = "2017",
abstract = "Za pravilnu i uspešnu primenu pesticida od posebnog je značaja izvršiti izbor
odgovarajućih rasprskivača. Takođe, rad sa odgovarajućim pritiskom ima veliki uticaj na
efikasnost tretiranja. Koliko će tretiranje biti uspešno direktno zavisi od poprečne
distribucije pesticida. Dobra poprečna distribucija znači: ujednačen oblik i veličinu kapi,
smanjenje odnošenja kapljica vetrom (drift), ujednačena količina sredstva i ravnomerna
raspodela kapi, a sve u cilju manje potrošnje korišćenog pesticida i manjih troškova
tretiranja. Rasprskivači se, uglavnom, izrađuju za definisan radni pritisak, koji može da
obezbedi potrebnu dezintegraciju kapljica. Da bi kvalitet zaštite bio dobar i vek rasprskivača
duži, pritisak tečnosti mora da se održava u tolerantnim granicama. Sa povećanjem pritiska
veličina kapljica se smanjuje. Poprečna distribucija unutar celookupnog posmatranog
područja mora biti jednaka, te se izražava pomoću koeficijenta varijacije koji ne sme biti
veći od 10%. U području potpunog prekrivanja površine tečnošću, izbačena količina
tečnosti ne sme da odstupa više od 10%. Navedeno je od posebnog značaja u tretiranju
uljane repice, kao kultura sa velikom ali tankom biljnom masom u završnim fazama razvoja.
Dobijeni razultati trebalo bi da prikažu koji od četiri testirana tipa rasprskivača daje najbolje
rezultate rada pri promeni pritiska., For the proper and successful use of pesticides it is especially important to select
the appropriate sprayers. Also, working with appropriate pressure has a major impact on the
effectiveness of treatment. How much treatment will be successfully done, directly depends
on the transverse distribution of pesticides. Good cross distribution means: uniform shape
and size of drops, drift reduction, uniform quantity of the product and even distribution of
drops in order to reduce the consumption of pesticides and smaller treatments. Sprayers are
mainly made for the defined operating pressure, which can provide the necessary
disintegration of droplets. In order for the quality of protection to be good and the life of
the sprayer longer, the pressure of the liquid must be maintained within tolerant limits. With
the increase in pressure, the droplet size decreases. The transverse distribution within the
entire observed area must be the same, expressed by the coefficient of variation, which must
not be greater than 10%. In the area of total overlapping of the surface with liquid, the
discharge of the liquid must not deviate more than 10%. The obtained results should show
which of the four tested type of sprayer produces the best results in changing pressure.",
publisher = "Novi Sad: National Society for Agricultural Engineering",
journal = "Savremena poljoprivredna tehnika",
title = "Radni pritisak kao faktor uniformnosti distribucije rasprskivača posebne namene, Operating pressure as a factor of distribution uniformity of nozzle for special purpose",
pages = "34-27",
number = "1",
volume = "43",
url = "https://hdl.handle.net/21.15107/rcub_fiver_2597"
}

Sedlar, A., Višacki, V., Uhlarik, A., Bugarin, R., Turan, J.,& Ponjičan, O.. (2017). Radni pritisak kao faktor uniformnosti distribucije rasprskivača posebne namene. in Savremena poljoprivredna tehnika
Novi Sad: National Society for Agricultural Engineering., 43(1), 27-34.
https://hdl.handle.net/21.15107/rcub_fiver_2597

Sedlar A, Višacki V, Uhlarik A, Bugarin R, Turan J, Ponjičan O. Radni pritisak kao faktor uniformnosti distribucije rasprskivača posebne namene. in Savremena poljoprivredna tehnika. 2017;43(1):27-34.
https://hdl.handle.net/21.15107/rcub_fiver_2597 .

Sedlar, Aleksandar, Višacki, Vladimir, Uhlarik, Ana, Bugarin, Rajko, Turan, Jan, Ponjičan, Ondrej, "Radni pritisak kao faktor uniformnosti distribucije rasprskivača posebne namene" in Savremena poljoprivredna tehnika, 43, no. 1 (2017):27-34,
https://hdl.handle.net/21.15107/rcub_fiver_2597 .

TY  - JOUR
AU  - Turan, Jan
AU  - Višacki, V.
AU  - Burg, P.
AU  - Findura, P. J.
AU  - Sedlar, Aleksandar
AU  - Rajković, Miloš
AU  - Zach, M.
PY  - 2017
UR  - http://fiver.ifvcns.rs/handle/123456789/1717
AB  - Sowing is affected by numerous factors, and thus high-quality sowing is a very important task for agricultural engineers and managers of profitable agricultural production. The primary purpose of sowing is placing seeds at proper depths and in-row spacings in well-prepared soil. Plant population particularly gives prominence to sowing as it directly affects the uniformity of plant growth and development. Soybean planting is especially dependent on the quality of planting for yield formation due to the significant vicinity of seeds. Provided all external factors of high-quality sowing are met, i.e. sowing conditions, the quality of sowing depends upon the planting mechanism. The following features of the planting mechanism are the most important: RPM of the seed disc, the travel speed of a seeder, and the values of gauge and vacuum pressure. This paper presents the results of sowing three different fractions of soybean seeds under laboratory conditions. The quality measurement of sowing was performed at different values of vacuum pressure and RPM of the seed disc. On balance, an increase in vacuum pressure results in improved sowing quality due to a stronger adherence of seeds to the seed disc. Lower values of vacuum pressure do not exert significant effects on the quality of sowing, regardless of the seed fraction. However, higher RPM of the seed disc entail an increase in the coefficient of variation. On the basis of the results obtained, a mathematical model for predicting changes in the coefficient of variation of sowing quality was developed using different operating parameters.
PB  - Mendel University of Agriculture and Forestry Brno
T2  - Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis
T1  - Development of a soybean sowing model under laboratory conditions
EP  - 962
IS  - 3
SP  - 957
VL  - 65
DO  - 10.11118/actaun201765030957
ER  - 

@article{
author = "Turan, Jan and Višacki, V. and Burg, P. and Findura, P. J. and Sedlar, Aleksandar and Rajković, Miloš and Zach, M.",
year = "2017",
abstract = "Sowing is affected by numerous factors, and thus high-quality sowing is a very important task for agricultural engineers and managers of profitable agricultural production. The primary purpose of sowing is placing seeds at proper depths and in-row spacings in well-prepared soil. Plant population particularly gives prominence to sowing as it directly affects the uniformity of plant growth and development. Soybean planting is especially dependent on the quality of planting for yield formation due to the significant vicinity of seeds. Provided all external factors of high-quality sowing are met, i.e. sowing conditions, the quality of sowing depends upon the planting mechanism. The following features of the planting mechanism are the most important: RPM of the seed disc, the travel speed of a seeder, and the values of gauge and vacuum pressure. This paper presents the results of sowing three different fractions of soybean seeds under laboratory conditions. The quality measurement of sowing was performed at different values of vacuum pressure and RPM of the seed disc. On balance, an increase in vacuum pressure results in improved sowing quality due to a stronger adherence of seeds to the seed disc. Lower values of vacuum pressure do not exert significant effects on the quality of sowing, regardless of the seed fraction. However, higher RPM of the seed disc entail an increase in the coefficient of variation. On the basis of the results obtained, a mathematical model for predicting changes in the coefficient of variation of sowing quality was developed using different operating parameters.",
publisher = "Mendel University of Agriculture and Forestry Brno",
journal = "Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis",
title = "Development of a soybean sowing model under laboratory conditions",
pages = "962-957",
number = "3",
volume = "65",
doi = "10.11118/actaun201765030957"
}

Turan, J., Višacki, V., Burg, P., Findura, P. J., Sedlar, A., Rajković, M.,& Zach, M.. (2017). Development of a soybean sowing model under laboratory conditions. in Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis
Mendel University of Agriculture and Forestry Brno., 65(3), 957-962.
https://doi.org/10.11118/actaun201765030957

Turan J, Višacki V, Burg P, Findura PJ, Sedlar A, Rajković M, Zach M. Development of a soybean sowing model under laboratory conditions. in Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis. 2017;65(3):957-962.
doi:10.11118/actaun201765030957 .

Turan, Jan, Višacki, V., Burg, P., Findura, P. J., Sedlar, Aleksandar, Rajković, Miloš, Zach, M., "Development of a soybean sowing model under laboratory conditions" in Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis, 65, no. 3 (2017):957-962,
https://doi.org/10.11118/actaun201765030957 . .

TY  - JOUR
AU  - Macák, M.
AU  - Đalović, Ivica
AU  - Turan, Jan
AU  - Šeremešić, Srđan
AU  - Tyr, Stefan
AU  - Milošev, Dragiša
AU  - Kulina, Mirko
PY  - 2017
UR  - http://fiver.ifvcns.rs/handle/123456789/1718
AB  - Soil organic carbon plays an important role in a long-term agroecosystem productivity, in the global C cycle, maintaining a soil nutrient pool and improving its availability. The objective of this study is the assess the impacts of long–term cropping practices on SOC dynamics in Slovakia and Serbia. Soil C sequestration is a complex process that is influenced by many factors, such as agricultural practice, climatic and soil conditions. For the both location the initial SOC decline was followed with the C stabilization and possible increase where proper practices were used. More intensive crop management systems that maintained residue cover provided the greatest benefit towards increasing the quantity of mineralizable nutrients within the active fraction of soil organic carbon (SOC), as well as increasing C sequestration as SOC. Long–term field experiments have contributed significantly to our current knowledge of soil quality and have been used to study the influence of crop management, fertilizer application and tillage practices on SOC content.
PB  - Eesti Pollumajandusulikool
T2  - Agronomy Research
T1  - Soil organic carbon in long–term experiments: Comparative analysis in Slovakia and Serbia
EP  - 1982
IS  - 5
SP  - 1971
VL  - 15
DO  - 10.15159/AR.17.053
ER  - 

@article{
author = "Macák, M. and Đalović, Ivica and Turan, Jan and Šeremešić, Srđan and Tyr, Stefan and Milošev, Dragiša and Kulina, Mirko",
year = "2017",
abstract = "Soil organic carbon plays an important role in a long-term agroecosystem productivity, in the global C cycle, maintaining a soil nutrient pool and improving its availability. The objective of this study is the assess the impacts of long–term cropping practices on SOC dynamics in Slovakia and Serbia. Soil C sequestration is a complex process that is influenced by many factors, such as agricultural practice, climatic and soil conditions. For the both location the initial SOC decline was followed with the C stabilization and possible increase where proper practices were used. More intensive crop management systems that maintained residue cover provided the greatest benefit towards increasing the quantity of mineralizable nutrients within the active fraction of soil organic carbon (SOC), as well as increasing C sequestration as SOC. Long–term field experiments have contributed significantly to our current knowledge of soil quality and have been used to study the influence of crop management, fertilizer application and tillage practices on SOC content.",
publisher = "Eesti Pollumajandusulikool",
journal = "Agronomy Research",
title = "Soil organic carbon in long–term experiments: Comparative analysis in Slovakia and Serbia",
pages = "1982-1971",
number = "5",
volume = "15",
doi = "10.15159/AR.17.053"
}

Macák, M., Đalović, I., Turan, J., Šeremešić, S., Tyr, S., Milošev, D.,& Kulina, M.. (2017). Soil organic carbon in long–term experiments: Comparative analysis in Slovakia and Serbia. in Agronomy Research
Eesti Pollumajandusulikool., 15(5), 1971-1982.
https://doi.org/10.15159/AR.17.053

Macák M, Đalović I, Turan J, Šeremešić S, Tyr S, Milošev D, Kulina M. Soil organic carbon in long–term experiments: Comparative analysis in Slovakia and Serbia. in Agronomy Research. 2017;15(5):1971-1982.
doi:10.15159/AR.17.053 .

Macák, M., Đalović, Ivica, Turan, Jan, Šeremešić, Srđan, Tyr, Stefan, Milošev, Dragiša, Kulina, Mirko, "Soil organic carbon in long–term experiments: Comparative analysis in Slovakia and Serbia" in Agronomy Research, 15, no. 5 (2017):1971-1982,
https://doi.org/10.15159/AR.17.053 . .

TY  - JOUR
AU  - Jokić, J.
AU  - Prole, Siniša
AU  - Butaš, Daliborka
AU  - Mrđa, Jelena
AU  - Turan, Jan
AU  - Bugarin, Rajko
AU  - Milovac, Željko
PY  - 2013
UR  - http://fiver.ifvcns.rs/handle/123456789/1265
AB  - In the conditions of market economy and fierce market competition, a priority for oilcrops seed producers and processors is meeting the high requirements of seed quality. Production of sunflower seed, of the required quality, has to be completed in a short period of time, in order to leave sufficient time for a country-wide advertizing campaign and shipment of the entire seed production to end customers. In addition to these time constraints, seed processing has been simultaneously required to keep improving the quality of processed seed. The paper discusses the tests of several seed quality parameters (test weight, thousand seeds weight, pure seeds, germination energy and germination), for four sunflower hybrids (Duško, NS Gricko, NS-H-111, Rimi PR). The policy of the plant is to process hybrid sunflower seed in lots (a maximum weight of 20,000 kg), each lot originating from a single location. The studied period involved one production year. Quality parameters were observed per hybrids for one machine (precleaning maschine). The results of testing showed that the seed of better quality after passage through the precleaning machine, that are better seed quality parameters at the exit of the machine.
AB  - U tržišnim uslovima privređivanja i ambijentu oštre konkurencije, prioritetan zadatak proizvođača semena uljanih kultura je proizvodnja semenskog materijala koja zadovoljava visoke zahteve kvaliteta proizvoda. Proizvodnju kvalitetnog semena hibridnog suncokreta je potrebno realizovati u veoma kratkom vremenskom periodu, kako bi se na vreme marketinški pokrilo tržište i kompletna proizvodnja semena plasirala do krajnjeg kupca. Pored vremenskog ograničenja dorade, postavljeni su paralelno i zahtevi poboljšanja kvaliteta dorađenog semena. Radom su obuhvaćena ispitivanja više parametara kvaliteta (hektolitarska masa, masa 1000 semena, čistoća, energija klijanja i klijavost semena), za četiri hibrida semena suncokreta (Duško, NS Gricko, NS-H-111 i Rimi PR). Seme hibridnog suncokreta je dorađivano po partijama (max. 20.000 kg) i lokalitetima (mestima proizvodnje). Istraživanje se odnosilo na period u godini proizvodnje, za izabrane hibride. Parametri kvaliteta su posmatrani po hibridima za jednu mašinu (grubi čistač). Rezultati ispitivanja su pokazali da je seme boljeg kvaliteta posle prolaza preko grubog čistača, odnosno da su parametri kvaliteta semena bolji na izlazu iz mašine.
PB  - Nacionalno naučno društvo za poljoprivrednu tehniku, Novi Sad
T2  - Savremena poljoprivredna tehnika
T1  - Analysis the parameters of quality sunflower hybrid seed after processing on precleaning machine
T1  - Ispitivanje parametara kvaliteta hibridnog semena suncokreta posle dorade na grubom čistaču
EP  - 52
IS  - 1
SP  - 41
VL  - 39
UR  - https://hdl.handle.net/21.15107/rcub_fiver_1265
ER  - 

@article{
author = "Jokić, J. and Prole, Siniša and Butaš, Daliborka and Mrđa, Jelena and Turan, Jan and Bugarin, Rajko and Milovac, Željko",
year = "2013",
abstract = "In the conditions of market economy and fierce market competition, a priority for oilcrops seed producers and processors is meeting the high requirements of seed quality. Production of sunflower seed, of the required quality, has to be completed in a short period of time, in order to leave sufficient time for a country-wide advertizing campaign and shipment of the entire seed production to end customers. In addition to these time constraints, seed processing has been simultaneously required to keep improving the quality of processed seed. The paper discusses the tests of several seed quality parameters (test weight, thousand seeds weight, pure seeds, germination energy and germination), for four sunflower hybrids (Duško, NS Gricko, NS-H-111, Rimi PR). The policy of the plant is to process hybrid sunflower seed in lots (a maximum weight of 20,000 kg), each lot originating from a single location. The studied period involved one production year. Quality parameters were observed per hybrids for one machine (precleaning maschine). The results of testing showed that the seed of better quality after passage through the precleaning machine, that are better seed quality parameters at the exit of the machine., U tržišnim uslovima privređivanja i ambijentu oštre konkurencije, prioritetan zadatak proizvođača semena uljanih kultura je proizvodnja semenskog materijala koja zadovoljava visoke zahteve kvaliteta proizvoda. Proizvodnju kvalitetnog semena hibridnog suncokreta je potrebno realizovati u veoma kratkom vremenskom periodu, kako bi se na vreme marketinški pokrilo tržište i kompletna proizvodnja semena plasirala do krajnjeg kupca. Pored vremenskog ograničenja dorade, postavljeni su paralelno i zahtevi poboljšanja kvaliteta dorađenog semena. Radom su obuhvaćena ispitivanja više parametara kvaliteta (hektolitarska masa, masa 1000 semena, čistoća, energija klijanja i klijavost semena), za četiri hibrida semena suncokreta (Duško, NS Gricko, NS-H-111 i Rimi PR). Seme hibridnog suncokreta je dorađivano po partijama (max. 20.000 kg) i lokalitetima (mestima proizvodnje). Istraživanje se odnosilo na period u godini proizvodnje, za izabrane hibride. Parametri kvaliteta su posmatrani po hibridima za jednu mašinu (grubi čistač). Rezultati ispitivanja su pokazali da je seme boljeg kvaliteta posle prolaza preko grubog čistača, odnosno da su parametri kvaliteta semena bolji na izlazu iz mašine.",
publisher = "Nacionalno naučno društvo za poljoprivrednu tehniku, Novi Sad",
journal = "Savremena poljoprivredna tehnika",
title = "Analysis the parameters of quality sunflower hybrid seed after processing on precleaning machine, Ispitivanje parametara kvaliteta hibridnog semena suncokreta posle dorade na grubom čistaču",
pages = "52-41",
number = "1",
volume = "39",
url = "https://hdl.handle.net/21.15107/rcub_fiver_1265"
}

Jokić, J., Prole, S., Butaš, D., Mrđa, J., Turan, J., Bugarin, R.,& Milovac, Ž.. (2013). Analysis the parameters of quality sunflower hybrid seed after processing on precleaning machine. in Savremena poljoprivredna tehnika
Nacionalno naučno društvo za poljoprivrednu tehniku, Novi Sad., 39(1), 41-52.
https://hdl.handle.net/21.15107/rcub_fiver_1265

Jokić J, Prole S, Butaš D, Mrđa J, Turan J, Bugarin R, Milovac Ž. Analysis the parameters of quality sunflower hybrid seed after processing on precleaning machine. in Savremena poljoprivredna tehnika. 2013;39(1):41-52.
https://hdl.handle.net/21.15107/rcub_fiver_1265 .

Jokić, J., Prole, Siniša, Butaš, Daliborka, Mrđa, Jelena, Turan, Jan, Bugarin, Rajko, Milovac, Željko, "Analysis the parameters of quality sunflower hybrid seed after processing on precleaning machine" in Savremena poljoprivredna tehnika, 39, no. 1 (2013):41-52,
https://hdl.handle.net/21.15107/rcub_fiver_1265 .

TY  - JOUR
AU  - Turan, Jan
AU  - Findura, P. J.
AU  - Đalović, Ivica
AU  - Sedlar, Aleksandar
AU  - Bugarin, Rajko
AU  - Janić, T. V.
PY  - 2011
UR  - http://fiver.ifvcns.rs/handle/123456789/1037
AB  - This paper presents laboratory investigations of grain size distribution, content change, as well as the change of static and dynamic angle of repose of mineral fertilizers Carbamide (CO(NH2)(2)), calcareous ammonium nitrate (NH4NO3 + CaCO3, 60:40), and ammonium nitrate (NH4NO3) depending on the hygroscopic influence of environment le on the increased moisture of the fertilizers. Using charts, the functional dependence and the statistical data were analyzed. The conclusions are satisfactory, suggesting ways to overcome the discussed problem, and motivate further investigations in this field.
T2  - International Agrophysics
T1  - Influence of moisture content on the angle of repose of nitrogen fertilizers
EP  - 204
IS  - 2
SP  - 201
VL  - 25
UR  - https://hdl.handle.net/21.15107/rcub_fiver_1037
ER  - 

@article{
author = "Turan, Jan and Findura, P. J. and Đalović, Ivica and Sedlar, Aleksandar and Bugarin, Rajko and Janić, T. V.",
year = "2011",
abstract = "This paper presents laboratory investigations of grain size distribution, content change, as well as the change of static and dynamic angle of repose of mineral fertilizers Carbamide (CO(NH2)(2)), calcareous ammonium nitrate (NH4NO3 + CaCO3, 60:40), and ammonium nitrate (NH4NO3) depending on the hygroscopic influence of environment le on the increased moisture of the fertilizers. Using charts, the functional dependence and the statistical data were analyzed. The conclusions are satisfactory, suggesting ways to overcome the discussed problem, and motivate further investigations in this field.",
journal = "International Agrophysics",
title = "Influence of moisture content on the angle of repose of nitrogen fertilizers",
pages = "204-201",
number = "2",
volume = "25",
url = "https://hdl.handle.net/21.15107/rcub_fiver_1037"
}

Turan, J., Findura, P. J., Đalović, I., Sedlar, A., Bugarin, R.,& Janić, T. V.. (2011). Influence of moisture content on the angle of repose of nitrogen fertilizers. in International Agrophysics, 25(2), 201-204.
https://hdl.handle.net/21.15107/rcub_fiver_1037

Turan J, Findura PJ, Đalović I, Sedlar A, Bugarin R, Janić TV. Influence of moisture content on the angle of repose of nitrogen fertilizers. in International Agrophysics. 2011;25(2):201-204.
https://hdl.handle.net/21.15107/rcub_fiver_1037 .

Turan, Jan, Findura, P. J., Đalović, Ivica, Sedlar, Aleksandar, Bugarin, Rajko, Janić, T. V., "Influence of moisture content on the angle of repose of nitrogen fertilizers" in International Agrophysics, 25, no. 2 (2011):201-204,
https://hdl.handle.net/21.15107/rcub_fiver_1037 .

TY  - JOUR
AU  - Sedlar, Aleksandar
AU  - Bugarin, Rajko
AU  - Jokić, Goran
AU  - Radić, Velimir
AU  - Turan, Jan
AU  - Milovac, Željko
PY  - 2011
UR  - http://fiver.ifvcns.rs/handle/123456789/997
AB  - Seed treatment with fungicides and insecticides is very good way for plant protection according economic and ecological aspects. That is especially important in early way of plant growing. Treating of seed with fungicide and insecitide provide reduce using of pesticides comparing with treatment with sprayer in the field. Seed treatment is last phase of seed preparing for the sowing and seed treater is equipment for seed treating. In this paperwork are shown results of research which was done in 'Institute for field and vegetable crops' in Novi Sad. Aim of this research was to check percentage of pesticide active materials losses during sunflower seed treatment with two seed treaters (B-10 and CC-50). Results of this research will be base for measures propose which should reduce fungicide losses in the future. Analyses of active materials losses shown as that seed treater B-10 had bigger losses. This bigger losses was expected because seed treater CC-50 it technical improve and better treater then B-10. Analyze of pesticide active materials losses on different hybrids shown that the best results had seed of hybrid Duško. That is because hybrid Duško only have smoothness seed pericarp.
AB  - Tretiranje semena fungicidima i insekticidima predstavlja, s ekonomskog i ekološkog aspekta, povoljan način zaštite ratarskih kultura od bolesti i štetočina u ranim fazama razvoja biljaka. Nanošenjem na seme upotrebljava se znatno manja količina pesticida nego kada se radi o folijarnim ili tretmanima zemljišta po celoj površini ili u trake. Hemijsko tretiranje semena je završna faza dorade i vrši se na specijalnim uređajima za zaprašivanje semena - zaprašivačima. U ovom radu su prikazani rezultati komparativnog ispitivanja dva zaprašivača (B-10 i CC-50), koja se koriste u doradi hibridnog semena suncokreta 'Instituta za ratarstvo i povrtarstvo' u Novom Sadu. Ispitivanje je obavljeno na hibridima suncokreta Rimi PR, Duško, Baća i NS-H-111. Najbolji rezultat je ostvaren tretiranjem semena hibrida Duško je jedino taj hibrid ima gladak i nenaboran perikarpa pogodan za zaprašivanje. Rezultati istraživanja su pokazali da zaprašivač B-10 ostvaruje veće gubitke. Lošiji rezultat zaprašivača B-10 je posledica starije tehnologije i tehničkih karakteristika ovog zaprašivača u odnosu na drugi ispitivani zaprašivač CC-50.
PB  - Nacionalno naučno društvo za poljoprivrednu tehniku, Novi Sad
T2  - Savremena poljoprivredna tehnika
T1  - Analyses of pesticide active materials losses during sunflower seed treatment with different seed treater
T1  - Analiza gubitaka aktivne materije pesticida pri zaprašivanju semena suncokreta primenom različitih zaprašivača
EP  - 370
IS  - 4
SP  - 363
VL  - 37
UR  - https://hdl.handle.net/21.15107/rcub_fiver_997
ER  - 

@article{
author = "Sedlar, Aleksandar and Bugarin, Rajko and Jokić, Goran and Radić, Velimir and Turan, Jan and Milovac, Željko",
year = "2011",
abstract = "Seed treatment with fungicides and insecticides is very good way for plant protection according economic and ecological aspects. That is especially important in early way of plant growing. Treating of seed with fungicide and insecitide provide reduce using of pesticides comparing with treatment with sprayer in the field. Seed treatment is last phase of seed preparing for the sowing and seed treater is equipment for seed treating. In this paperwork are shown results of research which was done in 'Institute for field and vegetable crops' in Novi Sad. Aim of this research was to check percentage of pesticide active materials losses during sunflower seed treatment with two seed treaters (B-10 and CC-50). Results of this research will be base for measures propose which should reduce fungicide losses in the future. Analyses of active materials losses shown as that seed treater B-10 had bigger losses. This bigger losses was expected because seed treater CC-50 it technical improve and better treater then B-10. Analyze of pesticide active materials losses on different hybrids shown that the best results had seed of hybrid Duško. That is because hybrid Duško only have smoothness seed pericarp., Tretiranje semena fungicidima i insekticidima predstavlja, s ekonomskog i ekološkog aspekta, povoljan način zaštite ratarskih kultura od bolesti i štetočina u ranim fazama razvoja biljaka. Nanošenjem na seme upotrebljava se znatno manja količina pesticida nego kada se radi o folijarnim ili tretmanima zemljišta po celoj površini ili u trake. Hemijsko tretiranje semena je završna faza dorade i vrši se na specijalnim uređajima za zaprašivanje semena - zaprašivačima. U ovom radu su prikazani rezultati komparativnog ispitivanja dva zaprašivača (B-10 i CC-50), koja se koriste u doradi hibridnog semena suncokreta 'Instituta za ratarstvo i povrtarstvo' u Novom Sadu. Ispitivanje je obavljeno na hibridima suncokreta Rimi PR, Duško, Baća i NS-H-111. Najbolji rezultat je ostvaren tretiranjem semena hibrida Duško je jedino taj hibrid ima gladak i nenaboran perikarpa pogodan za zaprašivanje. Rezultati istraživanja su pokazali da zaprašivač B-10 ostvaruje veće gubitke. Lošiji rezultat zaprašivača B-10 je posledica starije tehnologije i tehničkih karakteristika ovog zaprašivača u odnosu na drugi ispitivani zaprašivač CC-50.",
publisher = "Nacionalno naučno društvo za poljoprivrednu tehniku, Novi Sad",
journal = "Savremena poljoprivredna tehnika",
title = "Analyses of pesticide active materials losses during sunflower seed treatment with different seed treater, Analiza gubitaka aktivne materije pesticida pri zaprašivanju semena suncokreta primenom različitih zaprašivača",
pages = "370-363",
number = "4",
volume = "37",
url = "https://hdl.handle.net/21.15107/rcub_fiver_997"
}

Sedlar, A., Bugarin, R., Jokić, G., Radić, V., Turan, J.,& Milovac, Ž.. (2011). Analyses of pesticide active materials losses during sunflower seed treatment with different seed treater. in Savremena poljoprivredna tehnika
Nacionalno naučno društvo za poljoprivrednu tehniku, Novi Sad., 37(4), 363-370.
https://hdl.handle.net/21.15107/rcub_fiver_997

Sedlar A, Bugarin R, Jokić G, Radić V, Turan J, Milovac Ž. Analyses of pesticide active materials losses during sunflower seed treatment with different seed treater. in Savremena poljoprivredna tehnika. 2011;37(4):363-370.
https://hdl.handle.net/21.15107/rcub_fiver_997 .

Sedlar, Aleksandar, Bugarin, Rajko, Jokić, Goran, Radić, Velimir, Turan, Jan, Milovac, Željko, "Analyses of pesticide active materials losses during sunflower seed treatment with different seed treater" in Savremena poljoprivredna tehnika, 37, no. 4 (2011):363-370,
https://hdl.handle.net/21.15107/rcub_fiver_997 .

TY  - JOUR
AU  - Đukić, Nikola
AU  - Malidža, Goran
AU  - Bugarin, Rajko
AU  - Sedlar, Aleksandar
AU  - Turan, Jan
PY  - 2007
UR  - http://fiver.ifvcns.rs/handle/123456789/536
AB  - Desiccation has been used for a long time in agriculture. It is especially important in cold climate since spring crops are very often not ready for harvesting before late autumn, when harvesting condition are difficult. Desiccation is important in seed production since only high yield but also good seed qualities have been required. Sunflower hybrid seed production has been particularly facilitated due to specific plant pathology during ripening. By means of desiccation spreading of seed has been reduced, attack of different head parasites has been avoided, harvesting is easier and additional drying is not required. Negative effects of early frosts on germination could be avoided too. Desiccation is to be performed when seed moisture reach 40 %, depending on genotypes. Optimal solution for desiccation are self propel sprayers with high clearance. Machine for cutting corn flowers with sprayers is also good solution. Tractor sprayers and airplanes could be use if necessary. All equipment for application must have appropriate nozzles. Successful soya desiccation can be done with trailer tractor sprayer. The best results in sunflower desiccation give Reglone forte with dose 2 l/ha and norm 300 l/ha. For soya desiccation optimum dose is 2-3 l/ha with norm 150 l/ha.
AB  - Desikacija je agrotehnička mera koja je u poljoprivrednoj praksi prisutna duži niz godina. Ova mera posebno dolazi do izražaja u hladnijem klimatu, jer prolećni usevi često dospevaju za žetvu u poznu jesen kada su uslovi za ubiranje otežani. Desikacija je prisutna u svim regionima s intenzivnom poljoprivrednom proizvodnjom, koja podrazumeva mehanizovano ubiranje useva. Desikacija suncokreta, naročito semenskog, veoma je opravdana mera, jer se ranijom žetvom smanjuje rastur semena, izbegavaju se napadi raznih parazita glavice, olakšava kombajniranje i izbegava dodatno sušenje zrna. Izbegava se nepovoljan uticaj mrazeva na klijavost. Desikaciju treba izvoditi kad vlaga u zrnu padne ispod 40 %. U vezi sa ovim pitanjem postoje razlike između genotipova. Optimalno rešenje za desikaciju su samohodne prskalice sa visokim klirensom. Dobro rešenje je adaptirani čupač metlica za velike površine, a mogu da se koriste i vazduhoplovi. Nužno rešenje je korišćenje traktorskih prskalica. Svi uređaji za aplikaciju moraju biti opremljeni odgovarajućim rasprskivačima. Desikacija soje uspešno se izvodi vučenim traktorskim prskalicama. Najbolje rezultate u desikaciji suncokreta daje preparat "reglone forte" u dozi 2 l/ha sa normom od 300 l/ha. Za desikaciju soje optimalna doza je 2-3 l/ha i normom 150 l/ha.
PB  - Nacionalno naučno društvo za poljoprivrednu tehniku, Novi Sad
T2  - Savremena poljoprivredna tehnika
T1  - Mechanize desiccation in oil-plant production
T1  - Mehanizovana desikacija u proizvodnji uljanih kultura
EP  - 262
IS  - 3-4
SP  - 250
VL  - 33
UR  - https://hdl.handle.net/21.15107/rcub_fiver_536
ER  - 

@article{
author = "Đukić, Nikola and Malidža, Goran and Bugarin, Rajko and Sedlar, Aleksandar and Turan, Jan",
year = "2007",
abstract = "Desiccation has been used for a long time in agriculture. It is especially important in cold climate since spring crops are very often not ready for harvesting before late autumn, when harvesting condition are difficult. Desiccation is important in seed production since only high yield but also good seed qualities have been required. Sunflower hybrid seed production has been particularly facilitated due to specific plant pathology during ripening. By means of desiccation spreading of seed has been reduced, attack of different head parasites has been avoided, harvesting is easier and additional drying is not required. Negative effects of early frosts on germination could be avoided too. Desiccation is to be performed when seed moisture reach 40 %, depending on genotypes. Optimal solution for desiccation are self propel sprayers with high clearance. Machine for cutting corn flowers with sprayers is also good solution. Tractor sprayers and airplanes could be use if necessary. All equipment for application must have appropriate nozzles. Successful soya desiccation can be done with trailer tractor sprayer. The best results in sunflower desiccation give Reglone forte with dose 2 l/ha and norm 300 l/ha. For soya desiccation optimum dose is 2-3 l/ha with norm 150 l/ha., Desikacija je agrotehnička mera koja je u poljoprivrednoj praksi prisutna duži niz godina. Ova mera posebno dolazi do izražaja u hladnijem klimatu, jer prolećni usevi često dospevaju za žetvu u poznu jesen kada su uslovi za ubiranje otežani. Desikacija je prisutna u svim regionima s intenzivnom poljoprivrednom proizvodnjom, koja podrazumeva mehanizovano ubiranje useva. Desikacija suncokreta, naročito semenskog, veoma je opravdana mera, jer se ranijom žetvom smanjuje rastur semena, izbegavaju se napadi raznih parazita glavice, olakšava kombajniranje i izbegava dodatno sušenje zrna. Izbegava se nepovoljan uticaj mrazeva na klijavost. Desikaciju treba izvoditi kad vlaga u zrnu padne ispod 40 %. U vezi sa ovim pitanjem postoje razlike između genotipova. Optimalno rešenje za desikaciju su samohodne prskalice sa visokim klirensom. Dobro rešenje je adaptirani čupač metlica za velike površine, a mogu da se koriste i vazduhoplovi. Nužno rešenje je korišćenje traktorskih prskalica. Svi uređaji za aplikaciju moraju biti opremljeni odgovarajućim rasprskivačima. Desikacija soje uspešno se izvodi vučenim traktorskim prskalicama. Najbolje rezultate u desikaciji suncokreta daje preparat "reglone forte" u dozi 2 l/ha sa normom od 300 l/ha. Za desikaciju soje optimalna doza je 2-3 l/ha i normom 150 l/ha.",
publisher = "Nacionalno naučno društvo za poljoprivrednu tehniku, Novi Sad",
journal = "Savremena poljoprivredna tehnika",
title = "Mechanize desiccation in oil-plant production, Mehanizovana desikacija u proizvodnji uljanih kultura",
pages = "262-250",
number = "3-4",
volume = "33",
url = "https://hdl.handle.net/21.15107/rcub_fiver_536"
}

Đukić, N., Malidža, G., Bugarin, R., Sedlar, A.,& Turan, J.. (2007). Mechanize desiccation in oil-plant production. in Savremena poljoprivredna tehnika
Nacionalno naučno društvo za poljoprivrednu tehniku, Novi Sad., 33(3-4), 250-262.
https://hdl.handle.net/21.15107/rcub_fiver_536

Đukić N, Malidža G, Bugarin R, Sedlar A, Turan J. Mechanize desiccation in oil-plant production. in Savremena poljoprivredna tehnika. 2007;33(3-4):250-262.
https://hdl.handle.net/21.15107/rcub_fiver_536 .

Đukić, Nikola, Malidža, Goran, Bugarin, Rajko, Sedlar, Aleksandar, Turan, Jan, "Mechanize desiccation in oil-plant production" in Savremena poljoprivredna tehnika, 33, no. 3-4 (2007):250-262,
https://hdl.handle.net/21.15107/rcub_fiver_536 .