TY  - JOUR
AU  - Božović, Dragan
AU  - Popović, Dragana
AU  - Popović, Vera
AU  - Živanović, Tomislav
AU  - Ljubičić, Nataša
AU  - Ćosić, Milivoje
AU  - Spahić, Anđela
AU  - Simić, Divna
AU  - Filipović, Vladimir
PY  - 2022
UR  - http://fiver.ifvcns.rs/handle/123456789/2635
AB  - Maize ranks first among worldwide production and an important source of human and animal feed. Its production can be affected by management practices and climatic conditions. The objective of this study was to estimate stability of yield and hundred grains weight of six maize genotypes during two growing seasons at two locations, subjected to four different treatments: T1
treatment—without herbicide, Control; T2 treatment—active substance Nicosulfuron and Motivell commercial preparation; T3 treatment—active substance Rimsulfuron and Tarot; and, T4 treatment—active substance Forasulfuron and Equip. Additive main effects and multiplicative interaction—
AMMI model and genotype × environment interaction—GGE biplot were used to estimate GEI—genotype by environment interaction. The results showed that the influence of genotype (G), year (Y), locality (L), treatment (T) and all interaction on hundred grains weight were significant. The share of genotypes in the total phenotypic variance was 64.70%, while the share in total  interaction was 26.88%. The share of IPCA1 in terms of G × T interaction was 50.6%, while share of IPCA2 was 44.74%, which comprised together 94.80% of interaction. The first IPCA1 axis showed high share in the total interaction, which indicates out significance of genotype in total variation and interaction,
while high level of IPCA2 indicates a significant treatment effect. Genotype L-6 had the same mass of 100 grains (37.96 g) during both years of testing, while genotype L-1, with 4.46 g, had the largest difference between years. This clearly indicates the influence of genotype but also stress under the influence of sulfonylureas and environmental factors. The maize genotype with the highest values of hundred grains weight, L-5 and L-6, expressed the highest values of grain yield (4665 kg ha−1 and 4445 kg ha−1).
PB  - Basel : MDPI
T2  - Sustainability
T1  - Economical productivity of maize genotypes under different herbicides application in two contrasting climatic conditions
SP  - 5629
VL  - 14
DO  - 10.3390/su14095629
ER  - 

@article{
author = "Božović, Dragan and Popović, Dragana and Popović, Vera and Živanović, Tomislav and Ljubičić, Nataša and Ćosić, Milivoje and Spahić, Anđela and Simić, Divna and Filipović, Vladimir",
year = "2022",
abstract = "Maize ranks first among worldwide production and an important source of human and animal feed. Its production can be affected by management practices and climatic conditions. The objective of this study was to estimate stability of yield and hundred grains weight of six maize genotypes during two growing seasons at two locations, subjected to four different treatments: T1
treatment—without herbicide, Control; T2 treatment—active substance Nicosulfuron and Motivell commercial preparation; T3 treatment—active substance Rimsulfuron and Tarot; and, T4 treatment—active substance Forasulfuron and Equip. Additive main effects and multiplicative interaction—
AMMI model and genotype × environment interaction—GGE biplot were used to estimate GEI—genotype by environment interaction. The results showed that the influence of genotype (G), year (Y), locality (L), treatment (T) and all interaction on hundred grains weight were significant. The share of genotypes in the total phenotypic variance was 64.70%, while the share in total  interaction was 26.88%. The share of IPCA1 in terms of G × T interaction was 50.6%, while share of IPCA2 was 44.74%, which comprised together 94.80% of interaction. The first IPCA1 axis showed high share in the total interaction, which indicates out significance of genotype in total variation and interaction,
while high level of IPCA2 indicates a significant treatment effect. Genotype L-6 had the same mass of 100 grains (37.96 g) during both years of testing, while genotype L-1, with 4.46 g, had the largest difference between years. This clearly indicates the influence of genotype but also stress under the influence of sulfonylureas and environmental factors. The maize genotype with the highest values of hundred grains weight, L-5 and L-6, expressed the highest values of grain yield (4665 kg ha−1 and 4445 kg ha−1).",
publisher = "Basel : MDPI",
journal = "Sustainability",
title = "Economical productivity of maize genotypes under different herbicides application in two contrasting climatic conditions",
pages = "5629",
volume = "14",
doi = "10.3390/su14095629"
}

Božović, D., Popović, D., Popović, V., Živanović, T., Ljubičić, N., Ćosić, M., Spahić, A., Simić, D.,& Filipović, V.. (2022). Economical productivity of maize genotypes under different herbicides application in two contrasting climatic conditions. in Sustainability
Basel : MDPI., 14, 5629.
https://doi.org/10.3390/su14095629

Božović D, Popović D, Popović V, Živanović T, Ljubičić N, Ćosić M, Spahić A, Simić D, Filipović V. Economical productivity of maize genotypes under different herbicides application in two contrasting climatic conditions. in Sustainability. 2022;14:5629.
doi:10.3390/su14095629 .

Božović, Dragan, Popović, Dragana, Popović, Vera, Živanović, Tomislav, Ljubičić, Nataša, Ćosić, Milivoje, Spahić, Anđela, Simić, Divna, Filipović, Vladimir, "Economical productivity of maize genotypes under different herbicides application in two contrasting climatic conditions" in Sustainability, 14 (2022):5629,
https://doi.org/10.3390/su14095629 . .

TY  - JOUR
AU  - Popović, Dragana
AU  - Rajičić, Vera
AU  - Popović, Vera
AU  - Burić, Marko
AU  - Filipović, Vladimir
AU  - Gantner, Vesna
AU  - Lakić, Željko
AU  - Božović, Dragan
PY  - 2022
UR  - http://fiver.ifvcns.rs/handle/123456789/3109
AB  - Secale cereale L. is second important bread grain, after wheat, and an economically important crop for functional food. Rye production parameters in world and in Serbia were analysed in this study and quality parameters. The average rye area (4.28 mill. ha) and production (12.12 mil.t) in world, in the five- year period, recorded a growth trend and average grain yield was 3.01 t ha-1. In 2020 in the Republic of Serbia, the average grain yield of rye was 3,23 t ha-1. Rye is considered a healthy cereal due to its high content of dietary fiber and is a rich source of vitamins B and E, minerals: Ca, Fe, F, P, K, Zn, Mn, Cu, K, which is why it is a suitable raw material for the production of functional food. Rye foods have beneficial effects on insulin, which may have positive implications for diabetes prevention. Development of innovative and tasty rye products is crucial in increasing awareness, consumption of rye foods and thus production
PB  - Podgorica : University of Montenegro, Biotechnical Faculty
T2  - Agriculture and Forestry
T1  - Economically significant production of Secale cereale L. as functional foods
EP  - 145
IS  - 3
SP  - 133
VL  - 68
DO  - 10.17707/AgricultForest.68.3.11
ER  - 

@article{
author = "Popović, Dragana and Rajičić, Vera and Popović, Vera and Burić, Marko and Filipović, Vladimir and Gantner, Vesna and Lakić, Željko and Božović, Dragan",
year = "2022",
abstract = "Secale cereale L. is second important bread grain, after wheat, and an economically important crop for functional food. Rye production parameters in world and in Serbia were analysed in this study and quality parameters. The average rye area (4.28 mill. ha) and production (12.12 mil.t) in world, in the five- year period, recorded a growth trend and average grain yield was 3.01 t ha-1. In 2020 in the Republic of Serbia, the average grain yield of rye was 3,23 t ha-1. Rye is considered a healthy cereal due to its high content of dietary fiber and is a rich source of vitamins B and E, minerals: Ca, Fe, F, P, K, Zn, Mn, Cu, K, which is why it is a suitable raw material for the production of functional food. Rye foods have beneficial effects on insulin, which may have positive implications for diabetes prevention. Development of innovative and tasty rye products is crucial in increasing awareness, consumption of rye foods and thus production",
publisher = "Podgorica : University of Montenegro, Biotechnical Faculty",
journal = "Agriculture and Forestry",
title = "Economically significant production of Secale cereale L. as functional foods",
pages = "145-133",
number = "3",
volume = "68",
doi = "10.17707/AgricultForest.68.3.11"
}

Popović, D., Rajičić, V., Popović, V., Burić, M., Filipović, V., Gantner, V., Lakić, Ž.,& Božović, D.. (2022). Economically significant production of Secale cereale L. as functional foods. in Agriculture and Forestry
Podgorica : University of Montenegro, Biotechnical Faculty., 68(3), 133-145.
https://doi.org/10.17707/AgricultForest.68.3.11

Popović D, Rajičić V, Popović V, Burić M, Filipović V, Gantner V, Lakić Ž, Božović D. Economically significant production of Secale cereale L. as functional foods. in Agriculture and Forestry. 2022;68(3):133-145.
doi:10.17707/AgricultForest.68.3.11 .

Popović, Dragana, Rajičić, Vera, Popović, Vera, Burić, Marko, Filipović, Vladimir, Gantner, Vesna, Lakić, Željko, Božović, Dragan, "Economically significant production of Secale cereale L. as functional foods" in Agriculture and Forestry, 68, no. 3 (2022):133-145,
https://doi.org/10.17707/AgricultForest.68.3.11 . .

TY  - JOUR
AU  - Božović, Dragan
AU  - Popović, Vera
AU  - Rajičić, Vera
AU  - Kostić, Marko
AU  - Filipović, Vladimir
AU  - Kolarić, Ljubiša
AU  - Ugrenović, Vladan
AU  - Spalević, Velibor
PY  - 2020
UR  - http://fiver.ifvcns.rs/handle/123456789/2032
AB  - The objective of this study was to estimate genotype by locality, by year, by treatments (GxLxYxT) interaction using AMMI model, to identify maize genotypes with stable number of rows of grains performance in different growing seasons. The trials conducted with seven maize lines/genotypes, four treatments, two years and at the two locations. The results showed that the influence of genotype (G), year (Y), locality (L), and GxL, GxT, GxLxT, GxYxT, GxYxLxT interaction on maize number of rows of grains were significant (p lt 0.01). The genotype share in the total phenotypic variance for the grains number rows of was 53.50%, and the interaction was 21.15%. The results also show that the sums of the squares of the first and second major components (PC1 and PC2) constitute 100% of the sum of the squares of the interaction GxL. The first PC1 axis belongs to all 100%, which points to the significance of the genotype in the total variation and significance of the genotype for overall interaction with other observed sources of variability. The highest stability in terms of expression of the grains number of rows had the genotype L-6, followed by the genotypes L-4, L-5 and L-3. The lowest stability was demonstrated by the genotypes L-2 and L-1, which confirmed that these genotypes are not important for further selection in terms of this trait.
PB  - Univ Agr Sci & Veterinary Med Cluj-Napoca, Cluj-Napoca
T2  - Notulae Botanicae Horti Agrobotanici Cluj-Napoca
T1  - Stability of the expression of the maize productivity parameters by AMMI models and GGE-biplot analysis
EP  - 1397
IS  - 3
SP  - 1387
VL  - 48
DO  - 10.15835/nbha48312058
ER  - 

@article{
author = "Božović, Dragan and Popović, Vera and Rajičić, Vera and Kostić, Marko and Filipović, Vladimir and Kolarić, Ljubiša and Ugrenović, Vladan and Spalević, Velibor",
year = "2020",
abstract = "The objective of this study was to estimate genotype by locality, by year, by treatments (GxLxYxT) interaction using AMMI model, to identify maize genotypes with stable number of rows of grains performance in different growing seasons. The trials conducted with seven maize lines/genotypes, four treatments, two years and at the two locations. The results showed that the influence of genotype (G), year (Y), locality (L), and GxL, GxT, GxLxT, GxYxT, GxYxLxT interaction on maize number of rows of grains were significant (p lt 0.01). The genotype share in the total phenotypic variance for the grains number rows of was 53.50%, and the interaction was 21.15%. The results also show that the sums of the squares of the first and second major components (PC1 and PC2) constitute 100% of the sum of the squares of the interaction GxL. The first PC1 axis belongs to all 100%, which points to the significance of the genotype in the total variation and significance of the genotype for overall interaction with other observed sources of variability. The highest stability in terms of expression of the grains number of rows had the genotype L-6, followed by the genotypes L-4, L-5 and L-3. The lowest stability was demonstrated by the genotypes L-2 and L-1, which confirmed that these genotypes are not important for further selection in terms of this trait.",
publisher = "Univ Agr Sci & Veterinary Med Cluj-Napoca, Cluj-Napoca",
journal = "Notulae Botanicae Horti Agrobotanici Cluj-Napoca",
title = "Stability of the expression of the maize productivity parameters by AMMI models and GGE-biplot analysis",
pages = "1397-1387",
number = "3",
volume = "48",
doi = "10.15835/nbha48312058"
}

Božović, D., Popović, V., Rajičić, V., Kostić, M., Filipović, V., Kolarić, L., Ugrenović, V.,& Spalević, V.. (2020). Stability of the expression of the maize productivity parameters by AMMI models and GGE-biplot analysis. in Notulae Botanicae Horti Agrobotanici Cluj-Napoca
Univ Agr Sci & Veterinary Med Cluj-Napoca, Cluj-Napoca., 48(3), 1387-1397.
https://doi.org/10.15835/nbha48312058

Božović D, Popović V, Rajičić V, Kostić M, Filipović V, Kolarić L, Ugrenović V, Spalević V. Stability of the expression of the maize productivity parameters by AMMI models and GGE-biplot analysis. in Notulae Botanicae Horti Agrobotanici Cluj-Napoca. 2020;48(3):1387-1397.
doi:10.15835/nbha48312058 .

Božović, Dragan, Popović, Vera, Rajičić, Vera, Kostić, Marko, Filipović, Vladimir, Kolarić, Ljubiša, Ugrenović, Vladan, Spalević, Velibor, "Stability of the expression of the maize productivity parameters by AMMI models and GGE-biplot analysis" in Notulae Botanicae Horti Agrobotanici Cluj-Napoca, 48, no. 3 (2020):1387-1397,
https://doi.org/10.15835/nbha48312058 . .

TY  - JOUR
AU  - Božović, Dragan
AU  - Živanović, Tomislav
AU  - Popović, Vera
AU  - Tatić, Mladen
AU  - Gospavić, Zagorka
AU  - Miloradović, Zoran
AU  - Stanković, Goran
AU  - Dokić, Milorad
PY  - 2018
UR  - http://fiver.ifvcns.rs/handle/123456789/1743
AB  - Maize genotypes have varied reactions in different localities, years, treatments or the combination of these factors, due to genotype x year interaction. The objective of this study was to estimate genotype by locality, by year, by treatments (GxLxYxT) interaction using AMMI model, to identify maize genotypes with stable and high yield performance in different growing seasons. The trials with seven maize lines/genotypes were conducted during two years (2010-2011) at the four treatments and two locations: Pancevo and Zemun Polje. The results showed that the influence of: genotype (G), locality (L), treatment (T) and GxL, GxT, YxL, YxT, LXT, GxYxT, GxLxT, YxLxT, GxYxLxT interaction, on maize yield were significant (p lt 0.01). The share of genotype for maize grain yield in the total phenotypic variance was 21.16%, the aggregate share of the years and the locality was 6.10%, the treatment was 18.22%, and the total interaction was 54.52%. The AMMI analysis of the main components of IPCA1 and IPCA2 for the interaction of GxL and GxT shows that the first major component, IPCA1, comprises 100% of the sum of the squared interaction GxL and showed a statistically significant effect. The results also show that the sums of the squares of the first and second major components (PC1 and PC2) constitute 100% of the sum of the squared interaction GxL. The IPCA1 share in the GxT interaction was 47.39% and the IPC2 was 37.94%. IPC1 and IPC2 for this interaction was 85.33%. A high level of IPC2 indicates a significant treatment effect. The results of AMI analysis show that there is a significant difference between the genotype reactions to different ecological conditions for investigated factors. It also provided better insight in specific association between maize grain yield, locality, treatment and meteorological variables. Among the tested maize lines/genotypes, L-5, L-4 and L-6 could be separated as highest yielding genotypes, however L-5 could be recommended for further breeding program and in large-scale seed production due to its stable and high yielding performance.
PB  - Društvo genetičara Srbije, Beograd
T2  - Genetika-Belgrade
T1  - Assessment stability of maize lines yield by gge-biplot analysis
EP  - 770
IS  - 3
SP  - 755
VL  - 50
DO  - 10.2298/GENSR1803755B
ER  - 

@article{
author = "Božović, Dragan and Živanović, Tomislav and Popović, Vera and Tatić, Mladen and Gospavić, Zagorka and Miloradović, Zoran and Stanković, Goran and Dokić, Milorad",
year = "2018",
abstract = "Maize genotypes have varied reactions in different localities, years, treatments or the combination of these factors, due to genotype x year interaction. The objective of this study was to estimate genotype by locality, by year, by treatments (GxLxYxT) interaction using AMMI model, to identify maize genotypes with stable and high yield performance in different growing seasons. The trials with seven maize lines/genotypes were conducted during two years (2010-2011) at the four treatments and two locations: Pancevo and Zemun Polje. The results showed that the influence of: genotype (G), locality (L), treatment (T) and GxL, GxT, YxL, YxT, LXT, GxYxT, GxLxT, YxLxT, GxYxLxT interaction, on maize yield were significant (p lt 0.01). The share of genotype for maize grain yield in the total phenotypic variance was 21.16%, the aggregate share of the years and the locality was 6.10%, the treatment was 18.22%, and the total interaction was 54.52%. The AMMI analysis of the main components of IPCA1 and IPCA2 for the interaction of GxL and GxT shows that the first major component, IPCA1, comprises 100% of the sum of the squared interaction GxL and showed a statistically significant effect. The results also show that the sums of the squares of the first and second major components (PC1 and PC2) constitute 100% of the sum of the squared interaction GxL. The IPCA1 share in the GxT interaction was 47.39% and the IPC2 was 37.94%. IPC1 and IPC2 for this interaction was 85.33%. A high level of IPC2 indicates a significant treatment effect. The results of AMI analysis show that there is a significant difference between the genotype reactions to different ecological conditions for investigated factors. It also provided better insight in specific association between maize grain yield, locality, treatment and meteorological variables. Among the tested maize lines/genotypes, L-5, L-4 and L-6 could be separated as highest yielding genotypes, however L-5 could be recommended for further breeding program and in large-scale seed production due to its stable and high yielding performance.",
publisher = "Društvo genetičara Srbije, Beograd",
journal = "Genetika-Belgrade",
title = "Assessment stability of maize lines yield by gge-biplot analysis",
pages = "770-755",
number = "3",
volume = "50",
doi = "10.2298/GENSR1803755B"
}

Božović, D., Živanović, T., Popović, V., Tatić, M., Gospavić, Z., Miloradović, Z., Stanković, G.,& Dokić, M.. (2018). Assessment stability of maize lines yield by gge-biplot analysis. in Genetika-Belgrade
Društvo genetičara Srbije, Beograd., 50(3), 755-770.
https://doi.org/10.2298/GENSR1803755B

Božović D, Živanović T, Popović V, Tatić M, Gospavić Z, Miloradović Z, Stanković G, Dokić M. Assessment stability of maize lines yield by gge-biplot analysis. in Genetika-Belgrade. 2018;50(3):755-770.
doi:10.2298/GENSR1803755B .

Božović, Dragan, Živanović, Tomislav, Popović, Vera, Tatić, Mladen, Gospavić, Zagorka, Miloradović, Zoran, Stanković, Goran, Dokić, Milorad, "Assessment stability of maize lines yield by gge-biplot analysis" in Genetika-Belgrade, 50, no. 3 (2018):755-770,
https://doi.org/10.2298/GENSR1803755B . .